HBE 3500 ton Open Die Forging Press (Four (4) column and Push Down)

No. 2093

Manufacturer : HBE

PLC Control System and HMI : Siemens S7-400

19 inch color touch screen

Forging Force, Normal : 30MN (3000Ton)

Upsetting force : 35MN (3500Ton)

Press stroke : 2000 mm

Press daylight : 4000 mm

Distance between columns surface (LxR, FxB) : 1460 mm x 3000 mm

Number of pull back cylinders : 2

Main ram diameter : 1 x 1100 mm

Die Shift Device : 3 Position

Forging tolerance measures on hot workpiece : ±2 mm

Die table area (width x length x stroke) : 2000 mm x 4000 mm x ±3000 mm

Press speeds

- Forgings speed : 80 mm/sec

- Upsetting : 40 mm/sec

- Advance speed : 300 mm/sec /10 mm/sec

- Return speed : 300 mm/sec /10 mm/sec

- Die table slide : 250 mm/sec / 5 mm/sec

Press forces

- Forging : 30 MN (3000 Ton)

- Upsetting : 35 MN (3500 Ton)

- Return : 3.0 MN (300 Ton)

- Table shift : 1.5 MN (150 Ton)

- Top die clamping : 0.07 MN (7 Ton)

Number of press stroke

Stroke per minute : 12/15, 20/22, 85/90

Press stroke Penetration

Hydraulic pumps

- 8 sets x Axial piston pump, Variable Pressure rate 400 bar

- Working pressure 350 bar

- Total flow. 4800 L/min

Electric motors

- 4 sets x 613 kw, 6 p, 3300 volt

- 1P22, F-class

- Double end shaft

Total electric power supply

- 4 sets x main motor : 613 kw, 3300 volt, 1200rpm

- 2 sets x boost motor : 15 kw, 440 volt, 1800 rpm

- 1 set x pilot motor : 37.5 kw, 440 volt, 1200 rpm

- 1 set x cooling and filtering motor : 20kw, 440 volt, 1800 rpm

- Total power supply : 2539.5 kw

Overall dimension of press

11985 mm x 9940 mm x 2045 mm

Weight of press with hydraulic : Approx. 650 Tons

Dismantled